Crossmember Skid Plates

Want the added protection of a heavy duty skid plate but not the hassle and expense of a "Belly-Up" style skid? These 3/16-inch thick steel skids bolt to your stock transfer case crossmember and require no modifications (except drilling mounting holes, which will NOT void the factory warranty).

Part # 000238 '97 - 02 Jeep® Wrangler
NOTE: All skid plates also fit w/ transfer case drop brackets, as shown.

Part # 000252 '03 - Current Jeep® Wrangler
NOTE: Stock Auto Transmission skid plate must be slightly modified to fit.

Part # 000221 '87 - '95 Jeep® Wrangler

All skids are semi-flat black
(colors shown for illustration only)

All mounting hardware is stainless steel.

Installation Instructions | More Pictures | Adapting Skid Row® Engine Skid

©2003-2016 Tough Stuff Products, Inc. All rights reserved.
Jeep® and Wrangler™ are registered trademarks of FCA US LLC. Tough Stuff Products, Inc. has no affliliation with FCA US LLC. Crossmember Skid Plates; Paint, Door, Fender, Windshield Frame, Rocker Panel, Tailgate Sill, and Rear Corner Protectors; Tailgate Bump Guard; Rocker Guard Gasket; EZ-Flip; Hood Rack; Winch Safety Thimble; and GearNetz are trademarks of Tough Stuff Products, Inc. All rights reserved.